The Ultra Dog Door Security Bar is a simple, affordable, non-electric, mechanical commercial door security barricade that works! It is the first security product that can eliminate the elephant chains and padlocks and the liability that goes with them! Solves rolling blackout security issues when used with magnetic locking devices. Adds up to 10,000 pounds of physical deterrence to your existing door and hardware in the after-hours environment.
Guarantees secondary egress to firefighters and allows immediate egress with minimum effort and no prior training. The Ultra Dog Door Security Bar has been tested and used as a layered device by the DOD and NRC. Protects against hinge cuts and lock cutting charges. Fire Marshall approved in most states.
The AD400 Series Ultra Dog is designed for double outswing glass/steel doors mullion, but with an astragal. To order the correct unit for your application, you'll need to measure the hook center distance. Perfect commercial door security latch.
To verify latest product certifications and specifications, please see the manufacturer's website or contact us.
- General description: Ultra-Dog with 7" hook centers for a
- double door unit without mullion
- Weight: 7.4 lbs, ships via UPS
- Warranty: Five (5) years from original purchase
- Material
- Main support pieces, rods, storage hook
- and mounting brackets: Steel
- Block and handle supports: High impact plastic
- Rod cushions: Rubber
- Finish: Black
- Handle
- Dia: 1" Round
- Length between handle brackets: 5-13/16"
- Support bar (connects handle, locking rods and blocks
- Tubing size: 1" square
- Length between blocks: 22-3/4"
- Rods
- Dia: 3/8"
- Length, from face of support bar to inside of 90o bend: 2-7/8"
- Height of hook: 1-3/4"
- Hook to hook OC: 7"
- There is a rubber tip on the end of each hook
- Outside dia: 1/2"
- Height: 1-9/16"
- Thickness of rubber: 3/64"
- Blocks
- Height, at highest point: 4-9/16"
- Length: 6-1/2"
- Width: 1-1/8"
- There is a bolt that runs through the center of each block,
- which is used to shorten and lengthen the distance from
- the front face of the block from the main support bar,
- allowing the Ultra-Dot to fit a range of mullion depths.
- Holding brackets - triangular shape, mount to the face of the door
- Qty provided: 2 each
- Material thickness: 1/8"
- Height of back portion: 2-3/4"
- Inside width: 1"
- Inside depth: 1-1/16"
- Dia of holding rod: 3/8"
- Mounting holes
- Qty: 2
- Dia: 11/32"
- Hole to hole OC: 1-7/8"
- Storage J-hook
- Material thickness: 5/64"
- Width: 1"
- Outside height: 2-1/32"
- Inside depth: 1/2"
- Mounting holes
- Qty: 2
- Dia: 13/64" (between 3/16" and 7/32")
- Hole to hole OC: 1/2"
- Mounting hardware (included)
- - 4 Each 5/16-18 x 2-/4" Carriage bolt
- - 4 Each 5/16-18 Hex nut with 1/2" drive
- - 4 Each Flat washers, 7/8" OD, 13/32" ID, 5/64" thick
- - 2 Each #10 x 3/4" Hex washer head thread forming screw
- with 5/16" drive
- Also included:
- - 2 Each Self adhesive felt pads for the end of the block
- 3/4" wide x 4" long x 1/32" thick, black
- - 'Ultra-Dog Protected' self-adhesive sign, 2-3/8" x 3-1/4" Oval
- - Installation instructions and adjustment procedures,
- in English, Spanish and French
(Only registered customers can rate)
There are no comments for this product.
